MARSPRO II EPISTAR160
Mars PRO II EPISTAR 160 Led Grow Light ETL Approved
single chip high brightness LED can replace any MH/HPS system
Our mars PRO II series lights use single chip LEDs. They are all made by Epistar in Taiwan. All the chips are specially made to ETL standards, which means the highest quality chips are used. This chip makes the light much brighter than any other competitors with higher penetration.
MARS PRO II EPISTAR™ 160 LED GROW LIGHT
The Mars Pro II Epistar™ 160 LED Grow Light is an economical version light we made based on the Mars Pro Epistar™ 160 LED Grow Light. No remote control, but with veg and bloom switches to control different growing modes. Upgrated power supply, fans, as well as led chips, provide you the highest built quality of Mars Hydro. With the creative reflector cup design to give out the perfect mixed spectrum lights, meet the needs of those who must have the absolute highest quality harvest possible, The Mars Pro II Epistar 160 provides the chance to get the same superior output as Mars Pro Epistar 160 while you don’t have to pay the same.
When you demand enormous yields, ultimate control is just part of the recipe. Incredible power at low operating temperature’s gives you more than double the par values per watt compared to traditional HID or HPS lighting. Epistar’s™ unmatched intensity and Mars Hydro engineering, offers you extreme power with stunning efficiency.
For over 6 years Mars Hydro has been developing and innovating the LED Grow light industry. The reliability and performance of our products has made us the global leader of the industry. Purchase your Mars Pro II Epistar™ 160 and experience the true potential of your horticultural experience.
Mars Pro II Epistar™ 160 FeaturesOptics Technology: Spectra technology delivers uniform coverage at 100% efficiency & power..
Plug & Play Device: There is no need to purchase additional equipment.
Two Growth Modes for Use: Full spectrum for all growing circle! Choose veg or bloom switches for your own growing needs.
Maximum Coverage:Unique design offers largest coverage area possible without sacrificing performance.
Powerful LED's:Next Generation High Intensity Epistar™ LED’s. (HI-LED)
Mars Pro II Epistar™ 160 Technical Details
Mars Pro II Epistar™ 160 Specifications
Specification: Grow Light Details
LED Diode Brand: Epistar™ (HI-LED) High Intensity
Power Consumption: Bloom: 360~390w | Growth: 240~270w
Operating Requirements: Input voltage: 85v - 265v Amperage: 3.18 @ 110v | 1.55 @ 220v
Coverage Area: 2'x3' (61cm x 90 cm)
Hanging Distance: 24" - 30" (60cm - 76cm) from the top of your canopy
Product Dimensions: 21 "x14" x 4" (52cm x 34cm x 10cm)
Product Weight: 22lb. 10Kg.
Operating Temperature: 85°F -105°F (30°C - 40°C)
Decible Value: 58.7DB
Plug Type: 110/120V Standard US/CAD
Warranty: 2 years
Compare to HPS/MH/HID: 600 watt
LED Lens Degree: 100°
LED Diode Count: 160 Pieces
Spectrum: Epistar™: 440nm, 460nm, 630nm ，660nm,730nm, 2700k-3000k
Product Model Number: Epistar-160
Aprovals: cETL electrically approved for use in Canada
Maximize Energy Efficiency
|Cut down the power usage by up to 600 Watts per light! Simply eliminate the waste of supplying spectrums not needed for a plants specific growth cycle. Set your Mars Pro for bloom, growth or veg, cycles, each stage uses a different amount of power. Save even more money by no longer needing additional equipment by using the built in smart control features.|
|You can achieve the same amount of plant growth or more, with half of the electricity. Previous forms of lighting (examples: HID, HPS, Fluorescents) can be very powerful, but unfortunately they aren’t very power efficient. That is why LED grow lights have taken over the horticulture|
Premium Epistar LEDs offer a long lifespan
|Grow for years to come without having to replace your lighting system. 100% Plug & Play with no additional equipment to buy Mars Pro series grow lights are rated at 100,000 hours of use or more. The Modular design helps extend the lifespan of the unit by allowing for upgrades to future technologies.|
Versatile for any soil or medium or horticultural environment
|Mars Pro will outperform your existing lighting configuration in virtually every horticulture environment possible. Have confidence in your light source growing in all types of soils hydroponics areoponics and more.|
Modular Internal Build: Fully upgradable, easy warranties.
|Each Light element of the Mars pro series has independent circuitry from the others meaning, if one LED Element goes out the others will continue to function. Not only can you easily swap out a replacement part, avoiding lengthy repair times but this allows for upgrades to technologies we can offered in the future. Modular build, stay on the leading edge of technology without having to purchase a completely new lighting system.|
Reliable build quality: 2 year warranty
|We custom spec and manufacture our own Grow Lights. Every element that goes into our products must pass a stringent performance durability tests and electrical approvals. The Mars Pro Epistar™ Series sets a new standard of quality to the LED grow light industry featuring quality points such as: (All metal) over-built power supplies, TOP-BIN Epistar™ (HI-LED), Aircraft grade aluminum heat-sinks, Dual ball bearing fans, Heavy gauge steel casing, Premium copper internal wiring and power cord. Following strict development guidelines and quality engineering is how we can offer such an extensive warranty on every grow light we carry. Buy with confidence, buy Mars Hydro.|
Photosythetic Action Spectrums
The entire Mars Pro series has the unique feature of changing the spectral output to best suite your gardens current growth cycle. Below is a representation of the available spectrums for each mode Bloom, Growth, and Seedling.
Bloom mode is the maximum output the light can produce. Adding in the red spectrums, during bloom, the device delivers a full spectrum output
Also known as the vegetative stage, this mode primarily focus on white and blue spectrums.